12 en | General installation procedures Power amplifier
2023-01 | V02 | F.01U.402.247
Installation manual
Bosch Security Systems B.V.
4.3 Dimensions
4.4 Mounting and ventilation
Notice!
Before mounting the device, it is recommended to make the required settings. See
Indicators,
controls and settings, page 16
.
19”-rack mounting
This power amplifier has been designed for installation in a conventional 19”‑equipment rack.
Attach the power amp with its frontal rack mount ears using four screws and washers as
shown in the illustration.
To Next Page
Loading...
