Bosch Rexroth 3DREP 6 XE Series - Required Accessories

Assembly 25/48
RE 29184-XE-B/04.16, 3DREP 6../..XE, Bosch Rexroth AG
7.6 Required accessories
The following accessories are recommended for the connection of the valve. These
accessories are not included in the scope of delivery and can be ordered separately
from Bosch Rexroth:
For reasons of stability, exclusively use the following valve mounting screws.
Table 12: Valve mounting screws
Type Quantity Friction coefficient according to
VDA 235-101
Material number
ISO 4782-M5x50-10.9-flZn-240h-L 4 0.09...0.14 R913000064
Subplates with dimensions as specified in "Data sheet 45100" for valves with
porting pattern according to ISO 4401-03-02-05 without locating hole.
The addresses of our responsible sales organizations can be found online under
www.boschrexroth.com and in the appendix 16.1 "List of addresses".
Valve mounting screws
Subplates
Ordering address for
accessories and valves