About this documentation 5/48
RE 29184-XE-B/04.16, 3DREP 6../..XE, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• 3DREP 6../..XE...
This documentation is intended for assemblers, operators, service engineers, system
end-users, machine and system manufacturers.
This documentation contains important information on the safe and proper
assembly, transport, commissioning, operation, use, maintenance, disassembly and
simple troubleshooting of the product.
▶ Read this documentation thoroughly and in particular chapter2 "Safety
instructions" and chapter 3 "General information on damage to property and
damage to product" before working with the valve.
1.2 Required and amending documentation
▶ The product may not be commissioned until you have been provided with the
documentation marked with the book symbol
and you have understood and
observed it.
Table 1: Required and amending documentation
Title Document number Document type
Proportional pressure reducing valve,
direct operated
29184-XE Data sheet
General product information on
hydraulic products
07008 Data sheet
Subplates 45100 Data sheet
Declaration of conformity
3DREP 6..2X/..XE...
Document Refer to operating
instructions 29184-XE-B
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used to ensure
quick and safe working with the product using this documentation. For a better
understanding, they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions are included in chapter2.6 "Product-
specific safety instructions" and in chapter3 "General information on damage
to property and damage to product" and whenever a sequence of actions or
instructions is explained which bear the danger of personal injury or damage to
property. Thehazard avoidance measures described must be observed.
To Next Page
Loading...
