EasyManua.ls Logo

Bosch Rexroth 4WS2EM 10 Series - Packaging for disposal; Materials used in the valve; Recycling of hydraulic products; Extension and modification

Bosch Rexroth 4WS2EM 10 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Extension and modification 41/48
RE29583-XL-B/09.20, 4WS2EM 10...XL..., BoschRexrothAG
12.3 Packaging
Upon request, reusable systems can be used for regular deliveries.
The materials for disposable packaging are mostly cardboard, wood, and expanded
polystyrene. They can be recycled without any problems. For environmental reasons,
disposable packaging should not be used for returning products to BoschRexroth.
12.4 Materials used
Hydraulic components from BoschRexroth do not contain any hazardous materials
that could be released during the intended use. Usually no unfavorable effects on
human beings and on the environment have to be expected.
The hydraulic valves basically consist of:
Cast iron
Steel
Aluminum
Copper
Plastics
Electronics components and assemblies
Elastomers
12.5 Recycling
Due to the high metal content, hydraulic products can mostly be recycled. In order
to achieve an ideal metal recovery, their disassembly into individual assemblies
is required. The metals contained in electric and electronic assemblies can be
recovered by means of special separation procedures as well.
13 Extension and modification
WARNING
Explosion hazard caused by unauthorized modification!
Every non-permitted modification will void the explosion protection.
Modifications exceeding the extent described in these operating instructions are
not permitted.

Related product manuals