26/64 Transport and storage
Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018
You can lift the axial piston unit as shown in Fig. 5 with the eye bolt screwed into the
drive shaft.
Fig. 5: Installing the eye bolt
WARNING! Danger from suspended loads!
During transport with a lifting device, the axial piston unit can topple out of the
lifting strap and cause injury.
▶ Use the widest possible lifting strap.
▶ Make sure that the axial piston unit is securely fixed with the lifting strap.
▶ Only guide the axial piston unit by hand for fine positioning and to avoid swinging.
▶ Never stand or put your hands under a suspended load.
▶ Place the lifting strap around the axial piston unit in such a way that it does not
pass over assembled parts (e.g., valves, piping) and that the axial piston unit is
not suspended from assembled parts (see Fig. 6).
Fig. 6: Transporting with lifting strap
Transporting with lifting
strap
To Next Page
Loading...
