4/68
Bosch Rexroth AG, A4VG Series 40, RE 92004-01-B/05.2017
Contents
7.4.8 Changing the lever position of the HW control 39
7.4.9 Hydraulically connecting the axial piston unit 39
7.4.10 Electrically connecting the axial piston unit 45
7.5 Performing flushing cycle 45
8 Commissioning 46
8.1 Initial commissioning 46
8.1.1 Filling the axial piston unit 47
8.1.2 Testing the hydraulic fluid supply 48
8.1.3 Performing a functional test 48
8.2 Running-in phase 49
8.3 Recommissioning after a standstill 49
9 Operation 50
10 Maintenance and repair 51
10.1 Cleaning and care 51
10.2 Inspection 52
10.3 Maintenance 52
10.3.1 Changing the filter element 53
10.4 Repair 53
10.5 Spare parts 54
11 Removal and replacement 55
11.1 Required tools 55
11.2 Preparing for removal 55
11.3 Performing removal 55
11.4 Preparing the components for storage or further use 55
12 Disposal 56
13 Extension and conversion 57
14 Troubleshooting 58
14.1 How to proceed with troubleshooting 58
14.2 Malfunction table 59
15 Technical data 63
16 Alphabetical index 66
To Next Page
Loading...
Need help?
General
