RE 92004-01-B/05.2017, A4VG Series 40, Bosch Rexroth AG
Contents
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 8
2 Safety instructions 9
2.1 About this chapter 9
2.2 Intended use 9
2.3 Improper use 9
2.4 Personnel qualifications 10
2.5 General safety instructions 11
2.6 Product-specific safety instructions 12
2.7 Personal protective equipment 15
3 General instructions on damage
to property and theproduct 16
4 Scope of delivery 19
5 About this product 20
5.1 Performance description 20
5.2 Product description 20
5.2.1 Layout of the axial piston unit 20
5.2.2 Functional description 21
5.3 Bypass function 22
5.3.1 Activating and deactivating the bypass function 23
5.4 Product identification 24
6 Transport and storage 25
6.1 Transporting the axial piston unit 25
6.1.1 Transporting by hand 25
6.1.2 Transporting with a lifting device 25
6.2 Storing the axial piston unit 27
7 Installation 29
7.1 Unpacking 29
7.2 Installation conditions 29
7.3 Installation position 31
7.3.1 Below-reservoir installation (standard) 32
7.3.2 Above-reservoir installation 33
7.4 Installing the axial piston unit 34
7.4.1 Preparation 34
7.4.2 Dimensions 35
7.4.3 General instructions 35
7.4.4 Installation with coupling 36
7.4.5 Installation on a gearbox 37
7.4.6 Installation with cardan shaft 37
7.4.7 Completing installation 37
Contents 3/68
To Next Page
Loading...
Need help?
General
