94/108 Bosch Rexroth AG CS351 | 3609929B45/2014-09
Maintenance and repair
Exchanging fuses
• Open and remove the front cover.
• Remove the four bolts on the front plate
and take off the front plate.
• Exchange the fuses (see Fig. 37).
DANGER
Electrical voltages!
Electrocution
Do not carry out maintenance work on
the tightening channel unless the
Compact System has been switched
off and the power plug disconnected.
Protect the system from being swit-
ched on again.
Wait until the discharging time (at
least 90 seconds) has elapsed.
CS351_zweispaltig - D.book Seite 94 Donnerstag, 2. Oktober 2014 8:36 08
To Next Page
