17/20
Bosch Rexroth Canada ı May 2019 ı Revision 5.0
19. DO NOT re-wire any of the consoles or cable harnesses.
20. DO NOT weld on the vehicle without completely disconnecting all electronic consoles.
21. The cylindrical post on which the CS-150 console rests is the only point that may be
used for mounting purposes as no circuitry or wiring is present inside it.
Warning:
• DO NOT remove the fuse holder on the main harness.
• Replace fuse with appropriate rating (see fuse chart)
2-2 MAIN HARNESS R987376367 10A
4-4 MAIN HARNESS R987376368 15A
150 RCE IN-VALVE HARNESS R987376374 20A
150 RCE IN-CAB HARNESS R987376369 20A
***Failure to maintain proper fuse protection can lead to
product damage and fire hazard not covered by warranty.
Failure to follow the recommendations will void your warranty.
To Next Page
Loading...
