Bosch Rexroth IM24V - Maintenance and repair; Cleaning and care; Maintenance; Spare parts

3 609 929 B37/2008-09 | IM24V Bosch Rexroth AG 25/84
ENGLISH
ENGLISH
ITALIANO
ESPAÑOL
PORTUGUÊS
SVENSKA
FRANÇAIS
9 Maintenance and repair
9 Maintenance and
repair
Cleaning and care
Maintenance
The IM24V interface module is maintenance-
free if used as intended.
Spare parts
The addresses for our national
representatives can be found at
www.boschrexroth.com and in the address
directory in chapter “16 Service and sales”
on page 28.
10 Decommissioning
For details about how to disassemble or
replace your IM24V interface module please
refer to chapter “11 Disassembly and
replacement” on page 25.
11 Disassembly and
replacement
Required tools
• Screwdriver for spring-type terminal
Disassembling the IM24V interface
module
Proceed as follows to disassemble the
IM24V interface module:
1. Make sure the relevant system
components are not under voltage.
2. Loosen the front knurled bolts and pull
out the IM24V interface module.
3. Assemble a dummy panel, if necessary.
CAUTION
Any dirt or liquids penetrating
the device lead to
malfunctions!
Safe function of the IM24V
interface module is no longer
ensured.
y Always provide for absolute
cleanness when working on
the IM24V interface module.
CAUTION
Disconnecting the IM24V
interface module while under
voltage
Damage to the IM24V interface
module!
y Make sure that the relevant
system components are not
under voltage before removing
the IM24V interface module.
IM24V.book Seite 25 Donnerstag, 25. September 2008 1:13 13