R911299726 / 02 | Rexroth IndraControl VCP 05 Electric Drives and Controls | Bosch Rexroth AG 7-1
Interfaces
7 Interfaces
The device can either be supplied as a standard device or field bus
device.
The universal interface X3 combines several interface standards in one
connector. The connector is divided into two channels. The communi-
cation channel (SER1) is operated separately from the channel for the
upload/download/logging printer/scanner (SER2).
For the communication channel (SER1), the protocol-specific use only
allows one of the three interface standards to be used.
Depending on the device variant, several interfaces are available to
you:
Type code Available interfaces
RS232c (X3-SER2)
TTY / 20mA, RS485,
RS232c (X3-SER1)
DeviceNet
INTERBUS
PROFIBUS DP
VCPxx.xxxx-xxxRS-xx-xx X X - - -
VCPxx.xxxx-xxxDN-xx-xx X - X - -
VCPxx.xxxx-xxxIB-xx-xx X - - X -
VCPxx.xxxx-xxxPB-xx-xx X - - - X
Fig. 7-1: Device variants
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
