1-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 05 | R911299726 / 02
System Presentation
1.2 Operating System
A special operating system is installed on the small operator terminal. If
necessary, this operating system can be reloaded into the device (firm-
ware download). This can be done with the associated programming
software "VI Composer".
1.3 Commissioning
Mount the device properly (for more information, see chapter Dimen-
sions). Then connect the device to the voltage supply and to the control
unit or the field bus system, if required.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
