R911299726 / 02 | Rexroth IndraControl VCP 05 Electric Drives and Controls | Bosch Rexroth AG 7-11
Interfaces
1. Fastening Screws
2. Female Connector X2.2 (DeviceNet)
3. Female Connector X3 (SER2 RS232c)
4. Male Connector X2.1 (DeviceNet)
5. Connector X1 (Supply Voltage)
6. Threaded Bolt for Protective Grounding
7. Front Panel
8. Assignment Connector X1 (Supply Voltage)
9. Assignment for User Mode Switch
10. User Mode Switch on the Side
11. Assignment Male Connector X2.1 (DeviceNet)
12. Assignment Female Connector X2.2 (DeviceNet)
13. Diagnostic LED
14. Battery-related information
15. CE Mark
16. Warning
17. Assignment Female Connector X3 (SER2 RS232c)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
