Bosch rexroth KMV03.1R-B0007-P-D7-ET-NNNN-FW - System Type Plate (Module of Configured Variants)

8.2.7 System type plate (module of configured variants)
A module of configured variants consists of multiple individual components of
a system.
There are system type plates for components such as KMV03, KMS03,
KMS02 or KSM02. A copy of the system type plate is enclosed with the
products.
The figure below illustrates the exemplary system type plate of a module of
configured variants (SET) with the KMS03 component.
1 Trademark
2 Revision index
3 Production date (YYWww)
4 QR code
5 Manufacturing plant
6 Service hotline
7 Country of manufacture
8 Component A
9 Component A material number
10 Component B
11 Component B material number
12 Serial number, module of configured variants
13 Material number, module of configured variants
14 MAC address (Ethernet ID)
15 Type designation
Fig. 8-13: System type plate
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
273/407
Identification
R911335703_Edition 04 Bosch Rexroth AG