Bosch rexroth SB24 - Assembly, Connecting Plate; Assembly, Directional Valve Section

Assembly description 13/24
RE 66170-10-R/2019-05-15, control block SB24/34, BoschRexrothAG
5.1.2 Assembly, connecting plate
1. Manually screw-in the three tie rod screws ... with the thread side into the
tie rod thread bores
... ofthe connecting plate inaclockwise direction
and tighten them. Tightening torqueM
A
= 45
+5
Nm.
5.1.3 Assembly, directional valve section
▶ Orientate the control block segment with the flange surface ofthe opposite
O-ring side tothe connecting plate
and slide itvia the tie rod screws ...
tothe stop atthe connecting plate
.