RE 30232-B/08.2020, Valve amplifier VT-MSPA, Bosch Rexroth AG
3/36 Content
Content
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 5
1.3.1 Safety instructions 5
1.3.2 Symbols 6
1.3.3 Terms 6
1.3.4 Abbreviations used 6
2 Safety instructions 7
2.1 About this chapter 7
2.2 Intended use 7
2.3 Improper use 7
2.4 Qualification of personnel 8
2.5 General safety instructions 8
2.6 Product-specific safety instructions 9
2.7 Personal protective equipment 10
2.8 Operator‘s obligations 10
3 General information on damage to property anddamage to the product 11
4 Scope of delivery 12
5 About this product 12
5.1 Identification of the product 12
6 Transport and storage 13
6.1 Storing electronic products 13
7 Installation 13
7.1 Required tools 14
7.2 Recommended accessories 14
7.3 Installation conditions 14
7.3.1 Place of installation 14
7.4 Installing und connecting the VT-MSPA...-2X 14
7.5 Connecting the supply voltage 15
7.5.1 Shielding 16
7.5.2 General notes on shielding 16
7.5.3 Connecting the individual contacts 17
7.5.4 Suppressing interference of the system 18
8 Commissioning 18
8.1 Block circuit diagram VT-MSPA1-2X 19
8.2 Block circuit diagram VT-MSPA2-2X 20
8.3 Operating and display elements 21
8.3.1 Status LEDs 21
8.3.2 Test jacks 22
8.4 Selecting the valve types 22
8.5 Menu 25
8.5.1 Menu structure 25
8.6 Parameter setting 26
To Next Page
Loading...
