SAIC GRADE-X
13
4. VCI connector
① Confirm whether the diagnosis seat and shape is good.
② Open the PC wireless.
③ Select the appropriate connector according to the shape of the vehicle and the
diagnostic socket.
④ Master test cord to connect the host and tighten.
⑤ Diagnostic test line will connect the main connector into the diagnostic socket of
the vehicle.
⑥ Check whether VCI power indicator is on. If the power indicator light is off,
please make sure the car seat is powered or not.
⑦ When VCI power indicator is on, VCI connected successfully.
To Next Page
Loading...
