SM Series Heat Pump
SM Series Heat Pump6 720 220 406 (2015/02) Subject to change without prior notice
18 | Vertical Configurability
Figure # 51
6. Remove and discard blower collar. (Figure
#52)
Figure # 52
7. Remove and retain side panel blower opening
cover by removing (6) phillips head screws and
cutting/tearing insulation at perforations
around the perimeter of cover.(Figures #53
and #54)
Figure # 53
Figure # 54
8. Reinstall blower opening cover in the TOP
panel. (Figure #55)
Figure # 55
Discharge air configuration change is not
possible on Heat Pumps equipped with
Electric Heat Option.
To Next Page
Loading...
