Basic settingsde
4. Press repeatedly until the
appropriate signal volume is set.
2.To open the device settings,
3 seconds
press.
ABC
a flashes.
3. press repeatedly until
flashes.
4. Press repeatedly until the LEDs
show the appropriate value.
ABC
0, 1, 2 or 3 LEDs light up
accordingly. The set signal tone
can be heard.
Level 2 is set at the factory (LED
A and LED B).
5.To save the settings,
Press for 3 seconds.
If LED A lights up, the function is
permanently deactivated. If LED A
and LED B light up, the function is
via the button
selectable.
If LED A, LED B and LED C light up,
the function is permanently
activated.
Level 2 is set at the factory (LED
A and LED B).
Set Wi-Fi
1. press.
2.To open the device settings,
3 seconds
press.
a flashes.
3. Press repeatedly until
flashes.and
5.To save the settings,
Press for 3 seconds.
4. Press repeatedly until the LEDs
show the appropriate value.
Reset factory settings
A
1. press.
2.To open the device settings,
3 seconds
press.
a flashes.
3. Press repeatedly until
flashes.
,
If LED A is not lit, the wireless
network connection is turned off.
When LED A is lit, the wireless
network connection is turned on.
and
4. Press to reset the device to
factory settings.
aThe device will be reset.
5.To save the settings,
Press for 3 seconds.
RemOte S ttar aactivate
1. press.
37
To Next Page
Loading...
