11
Regulations
Therm 4300 – 6 720 821 607 (2018/01)
3.5 Power adjustment
Lower water temperature.
Less power.
Fig. 7
Higher water temperature.
More power.
Fig. 8
3.6 Temperature/flow adjustment
▶Turn anti-clockwise
Increases flow and decreases water temperature.
Fig. 9
▶Turn clockwise.
Decreases flow and increases water temperature.
Regulating the temperature to the minimum req
uired value
reduces energy consumption as well as the possibility of lime
scale deposits in the heat exchanger.
CAUTION: The temperature on the display is
not precise, always check before bathing
children or elderly people.
4Regulations
Any local by-laws and regulations pertaining to installation and
use of gas-heated appliances must be observed. Please refer to
the laws that should be attended in your country.
5 Installation (must be carried out only by
qualified technicians)
DANGER: Explosion!
▶ Always turn off the gas cock before
carrying out any work on components
which
carry gas.
The appliance must be installed in
accordance with the requirements of SANS
10087-1for use with LPG, SANS 827 for use
with NG and any fire department regulations
and/or local bylaws applicable to the area.
Installation, electrical connection, gas
installation, connection of inlet and exhaust
pipes and initial startup must be realized
exclusively by authorized personnel.
The appliance can only be sold in the
countries mentioned in the type plate.
NOTICE: Damage to the device!
Leaking connections.
▶ Do not put the device down on the floor
w
ith the connections facing
downwards, so that the metal threads
are not damaged.
To Next Page
Loading...
