Commissioning report for the appliance | 31
8 716 473 216 (2014/09)Gaz 6000 W
16 Commissioning report for the appliance
Customer/system user:
Surname, first name Street, house number
Telephone/fax Postcode, town
System installer:
Order number:
Appliance type (Complete a separate report for every appliance!)
Serial number:
Date commissioned:
Individual appliance | Cascade, Number of appliances: ......
Boiler room: Cellar | Attic | Other:
Ventilation apertures: Number: ......, Size: approx. cm
2
Flue routing: Twin pipe system | LAS | Duct | Separate pipe routing
Plastic | Stainless steel | Aluminium
Total length: approx. ...... m | 90 ° bend: ...... pce | 15 - 45 ° bend: ...... pce
Flue tightness test (with combustion air flowing in countercurrent): Yes | No
CO
2
value in the combustion air at maximum rated output: %
O
2
value in the combustion air at maximum rated output: %
Notes regarding underpressure or overpressure operation:
Gas setting and flue gas test:
Set gas type: Natural gas H | Propane | Butane
Gas supply pressure: Kpa Gas static supply pressure: Kpa
Selected maximum rated output: kW Selected minimum rated output: kW
Gas flow rate at maximum
rated output: mj/hr
Gas flow rate at minimum
rated output: mj/hr
Net calorific value H
iB
: kWh/m
3
Measuring the flue gas loss at maximum rated output: % Measuring the flue gas loss at minimum rated output: %
CO at maximum rated output: ppm CO at minimum rated output: ppm
Flue gas temperature at maximum
rated output: °C
Flue gas temperature at minimum
rated output: °C
Maximum measured flow temperature: °C Minimum measured flow temperature: °C
System hydraulics:
Low loss header, type: Additional expansion vessel
Heating circuit pump: Size/pre-charge pressure:
Automatic air vent valve installed?
Yes | No
DHW cylinder/type/number/heating surface output:
System hydraulics checked, notes: