Appliance information
Greenstar Danesmoor Utility
2022+
and Utility System
2022+
- 6 721 846 263 (2022/01) 9
Fig. 2 Control panel thermostat detail Fig. 3 Top view connections
Figure 1 does not include the top, front, left, and right hand side panel
1 Return connection 21 Oil pump (behind plastic cover)
2 Flow connection 22 Riello RDB burner
3 Pressure relief valve 23 Burner control box (behind plastic cover)
4 Air inlet casing 24 Lock out reset button (on the front of the burner control box)
5 Secondary heat exchanger baffles 25 Expansion vessel
6 Secondary heat exchanger 26 Control box assembly
7 Baffle retaining clip 27 Temperature control knob
8 Secondary Heat exchange drain point 28 Flue manifold access cover
9 Condensate discharge 29 Combustion chamber access door (primary baffle inside)
10 Condensate trap 30 Flue gas sampling point
11 Optional oil return position 31 System pressure gauge
12 Oil isolating valve 32 Flue overheat thermostat phial
13 Primary heat exchanger 33 Flue manifold
14 Pump drain point 34 Air pressure switch
15 Burner mount plate 35 Burner lead connector socket
16 Base plate and oil drip tray 36 Flue thermostat reset
17 Circulating pump 37 Expansion vessel retaining bracket
18 Primary heat exchanger drain point 38 High limit thermostat reset
19 Burner air intake 39 Auto reset thermostat
20 Burner motor (behind plastic cover) 40 Control & manual reset overheat thermostat phial
41 Auto-reset high-limit thermostat phial
Table 3 Appliance component details
35
36
37
38
39
6720
821720-03.1Wo
3
41
40
2
1
FRONT
6720821720-04.1Wo