Bose ControlSpace ESP-88C - Page 93

93
19.5dBu
ATS2 Settings
Test Limits
Perform this test on channels 1 through 8.
5-6.Gain +54dB
ESP Setting: Set all channel gains to = 54dB.
(Command on COM = ^BA{1/2}{L/R}54^C)
AMPL(1kHz)
ATS2 Settings
Test Limits
Noise
ATS2 Settings
Test Limits
Perform this test on channels 1 through 8.
TEST PROCEDURES
Item Setting
Frequency 1kHz
Amplitude -24.5dBu (Nominal +19.5dB)
B/W 22HZ / 22KHz LPF
Filter “A” Weighting
Item Upper limit Lower limit
Function(THD+N) 1.5% 0
Item Setting
Frequency 1kHz
Amplitude -50.00dBu
B/W <10HZ / FS/2
Filter None
Item Upper limit Lower limit
Level +5.5dBu +2.5dBu
Item Setting
Frequency --
Amplitude Off
B/W 22HZ / 22KHz LPF
Filter “A” Weighting
Item Upper limit Lower limit
Level -63dBu -200dBu