21
Playing External Sources
Changing channels using a VCR or cable/satellite box
You may want to change TV channels using a VCR or a cable/satellite box instead of using
the tuner in your TV. To do this you will need to change the TV tuner selection in the system
settings menu:
1. Turn on your TV.
2. Press the TV button on the LIFESTYLE
®
remote control.
3. Press the Settings button.
4. Select System Setup
and press Enter.
5. Select Remote Control Setup and press Enter.
6. Select TV T
uner.
7. Change the setting to VCR or AUX.
8. Press the Settings button again.
9. Use the selected tuner to switch TV channels.
Recording to a tape deck
To record to a connected tape deck:
1. Choose the source (FM/AM, DVD/CD, or AUX) you want to record.
2. Set the tape deck to record.
3. Play the source. In a two-zone system, be sure to play the source in zone 1.
AM259776_02_V.pdf • April 23, 2002