~
I
CD changer
or
other playback equipment
Connecting
other
playback
equipment
Other playback components such as
an
audio CD changer can be connected
to
the AUX
inputs on the rear panel
of
the media center.
AUXinput connections
Using
digital
audio
connections
If your
TV,
VCR, tape deck,
or
AUX component has electrical digital audio connections, you
may connect them
to
the media center using the corresponding DIGITAL connector.
You
will
need a
7512
cable with RCA connectors (such as a video cable).
)
NtJ'B;e:
Your
system's DTS
decoding
is limited to
playing
back
CDs
and
DVDs with DTS audio
tracks. DTS
decoding
of
bitstreams from external sources is
not
supported.
and
your system
cannot
provide DTS bitstreams to external devices.
Using
optical
digital
audio
connections
If your
TV,
VCR, tape deck,
or
AUX component has
an
optical digital audio connection, you
may connect it
to
the media center using the OPTICAL INPUT/OUTPUT connectors.
You
will
need
an
optical digital cable
to
make this connection.
)
NtJ'B;@:
Before you can listen to a source through the OPTICAL input. you
need
to assign the
OPTICAL connection to
TV,
VCR,
TAPE
or
AUX. See
your
operating
guide
for instructions on
using the system settings menus.
27
To Next Page
Loading...
