Bose PS602 - Technical Information; LED Fault Indication

Technical Information
pro.Bose.com
30 English Installation Guide
POWER LED (all amplifiers)
Solid amber LED indicates an over-temperature fault
Solid red LED indicates a power supply fault
SIGNAL LED (PS602 and PS602P)
Both LEDs will display solid red if a power supply fault is detected
SIGNAL LED (PS604)
All four LEDs will display solid red if a power supply fault is detected
LIMIT LED (PS602 and PS602P)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
Both LEDs will display solid red when the outputs are muted due to an amplifier fault, or if there is a power supply fault
LIMIT LED (PS604)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
LIMIT LED 1 & 2 will display solid red when the outputs are muted due to an amplifier one fault
LIMIT LED 3 & 4 will display solid red when the outputs are muted due to an amplifier two fault
All four LEDs will display solid red if there is a power supply fault
LED Fault Indications
Adaptable Power Amplier
LIMIT
SIGNAL
12
PowerShare
PS602
POWER
Figure 14. PS602 and PS602P
Adaptable Power Amplifier
LIMIT
SIGNAL
12
34
PowerShare
PS604
POWER
Figure 15. PS604