28 - ENGLISH
WALL-MOUNTING
Hardware specifications
You can mount the amplifier on a wall with the mounting bracket and hardware.
WARNING: Do NOT mount on surfaces that are not sturdy enough, or that have haz-
ards concealed behind them, such as electrical wiring or plumbing. If you
are not sure about installing the bracket, contact a qualified professional
installer. Ensure the bracket is installed according to local building codes.
Item Wood Wallboard
Wall thickness
3
⁄4 in. (19 mm) or thicker
3
⁄8 in. (9.5 mm) or thicker
Drill bit
3
⁄32 in. (2.38 mm)
1
⁄4 in. (6.35 mm)
Phillips-head wood
screws (2)
#10 x 1
1
⁄4 in. (M5 x 32 mm) #10 x 1
1
⁄4 in. (M5 x 32 mm)
Plastic anchors (2)
Not used #10 (M5) plastic anchors
Mount the bracket to the wall
Use the mounting hardware to secure the mounting bracket to the wall.
CAUTIONS:
• Only wall mount the amplifier with the bracket provided with your amplifier.
• Do NOT mount the bracket on the ceiling.
• Do NOT place or install the bracket or amplifier near any heat sources, such as
fireplaces, radiators, heat registers or other apparatus ( including amplifiers) that
produce heat. Additionally when mounting near a TV consult your TV owner’s guide
for related mounting information.
To Next Page
Loading...
