4
Playing
Now that you’re nished with the preparations, you can get
started playing the GT-1.
Selecting a Patch
The GT-1 contains numerous eects. A combination of
these eects and their settings is called a “patch.”
User patch U01
User patch U99
Preset patch P01
Preset patch P99
Built in to its memory, the GT-1 has 99 (starting from U01)
user patches that can be overwritten, and 99 preset patches
(starting from P01) that cannot be overwritten.
Selecting by Patch Number
1. Press [
H
], [
I
] switches to switch patches.
You can also change patches consecutively by turning the
[1] knob.
When you select a patch, the buttons or PEDAL FX indicator
that are turned on for that patch are lit.
MEMO
You can’t switch patches unless you’re in the Play screen
(p. 4). Press the [EXIT] button to return to the Play
screen, and then switch patches.
Choose a Patch Based on a Category
(EASY SELECT)
1. With the play screen displayed, press the [EASY
SELECT] button
EASY SELECT screen is displayed.
2. Use the [1] knob to choose the search method
(SORT TYPE).
Value Explanation
GENRE Search by the patch category
DRIVE Search by the distortion type
3. Use the [2] knob to choose the patch category or
the distortion type.
or
4. Use the [3] knob to choose a patch from the list on
the display.
Patch number display
The display shows the currently selected patch number and
the patch name.
About the Play Screen
The screen that appears after you turn on the power is
called the “Play screen.”
[1] [2] [3]
Parameters that can be adjusted
using the [1]–[3] knobs
MASTER BPM
OUTPUT setting
Patch number
Patch name
Icons in the display
Icon Explanation
Displays the MASTER BPM.
This is displayed when OUTPUT is set to
anything other than LINE/PHONES.
This is displayed when OUTPUT is set to
LINE/PHONES.
* For details about MASTER BPM, refer to “Parameter
Guide” (PDF le).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
