6
Editing: Eects
EASY EDIT
You can use EASY EDIT to change the type of distortion
(TONE) for the current sound, add or modify a modulation-
type eect (VIBES), or change the reverberation (ECHO).
1. With the play screen displayed, press the [EASY
EDIT] button
The EASY EDIT screen appears.
2. Use the [1]–[3] knobs to adjust “TONE,” “VIBES,” and
“ECHO” to your taste.
With the EASY EDIT screen displayed, you can press the
[ENTER] button to make the following detailed settings.
Saving a Patch
When you want to save a patch you have created, save it as
a user patch by following the procedure below. If you do
not save the patch, the edited settings will be lost when
you turn o the power or switch to another patch.
1. Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE UTILITY screen appears.
2. Choose “WRITE” (PATCH RIGHT) with the [1] knob,
and press the [ENTER] button.
3. Choose the patch write destination (U01–U99) with
the [1] knob.
4. Press the [ENTER] button.
Here you can edit the name.
Controller Operation
Knob [1] Changes the character
Knob [2] Moves the cursor
Knob [3] Selects the type of characters
5. Press the [ENTER] button.
Here you can specify the category of the patch.
Use the [1] knob to select the category.
6. Press the [ENTER] button once again.
Once the patch has been saved, you are returned to the
Play screen.