Boss GT-1 User Manual

7
Editing: MENU
Basic MENU Operations
Here you can make settings that are common to the entire
GT-1 (System parameters). Here you can make settings for
output, USB, as well as assign the functions of the [1]–[3]
knobs, etc.
For details on the parameter, refer to the “GT-1 Parameter Guide”
(PDF le).
1. Press the [MENU] button.
2. Use the [1] knob to choose the item that you want
to edit.
3. Press the [ENTER] button.
4. Use the [1]–[3] knobs to edit the value of the
parameters shown in the screen.
Use the [ENTER] button to switch pages of the edit screen.
5. Press the [EXIT] button to return to the play screen.
In this manual, the order of operations is written as follows.
<Example>
Press the [MENU] button.
Rotate the [1] knob and choose “USB,” and then press the
[ENTER] button.
?
Choose [Menu]
0
“USB.”
Assigning Favorite Parameters to [1]–[3]
Knobs
You can assign the parameters that are controlled by
parameter knobs [1]–[3] when the Play Screen (p. 4) is
displayed.
1. Choose [MENU]
0
“KNOB.”
2. Use the [1]–[3] knobs to specify the parameters to
be controlled by each knob.
3. Press the [EXIT] button a number of times to return
to the play screen.
Adjusting the Contrast (Brightness) of
the Display
You can adjust the brightness of the display.
1. Choose [MENU]
0
“DISPLAY.”
2. Adjust the value with the [1] knob.
Restoring the Factory Default Settings
(Factory Reset)
Restoring the GT-1’s settings to their original factory default
settings is referred to as “Factory Reset.”
Not only can you return all of the settings to the values in
eect when the GT-1 was shipped from the factory, you can
also specify the items to be reset.
* When you execute “Factory Reset,” the settings you
made will be lost. Save the data you need to your
computer using the dedicated software.
1. Choose [MENU]
0
“F. RESET” (FACTORY RESET).
2. Choose the type of settings to be restored to the
factory default settings with knobs [1] and [3].
Knob Parameter Value Explanation
[1]
[3]
FROM
TO
SYSTEM System parameter settings
U01–U99
Settings for Patch Numbers
U01–U99
3. Press the [ENTER] button.
If you decide not to execute the factory reset, select
“CANCEL” and press the [ENTER] button.
4. To execute the factory reset, use the [1] knob to
select “EXECUTE,” and press the [ENTER] button.
Once the Factory Reset is complete, you are returned to the
Play screen.

Boss GT-1 Specifications

General

Product color	Black
Sound effects	Delay, Reverberation
Sound effects quantity	108
AUX in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) output	1
Display type	LCD
Battery type	AA
Operating time	7 h
Power source type	Battery, DC
Number of batteries supported	4

Weight and Dimensions

Depth	152 mm
Width	305 mm
Height	56 mm
Weight	1300 g