10
Choosing a system-wide setting is great when you know you want to use
an assignment the same way in every patch. For example, you may want to
set PEDAL FX to FOOT VOLUME or use CTL 2 for tap tempo in every patch.
Setting a controller to system-wide status saves you from having to make the
same settings over and over in all your patches.
System-wide settings are also a great way to temporarily override
patch control settings for a special application. Setting a particular
realtime controller for system-wide use doesn’t alter the settings
stored for that controller in each patch; it only ignores them.
We’ll show you how to set a realtime controller to system-wide status a little
later. For now, we’ll just focus on making realtime controller assignments in
patches.
Quickly Assigning Common Functions to Realtime
Controllers
On the SW&PDL FUNCTION screen, you
can quickly assign commonly used effects
parameters and other functions to the
onboard pedal and switches. These include
things like assigning a foot switch to turn a
particular effect group on/off, setting a foot
switch for tap tempo, or setting the function of PEDAL FX.
For most basic effects adjustments, these “shortcut” assignments will be
all you’ll ever need to set. Following are tables that show the available
assignments.
SW&PDL FUNCTION Assignments: CTL 1, CTL 2, and
EXP Sw
Function What it Does
Off No assignment.
Ch. A/B Switches between Preamp CHANNEL A and B.
OD Solo Switches OD/DS SOLO on/off.
Function What it Does
Solo Switches Preamp SOLO on/off for the currently
selected channel: A or B.
A&B Solo Simultaneously switches Preamp SOLO on/off for
both CHANNEL A and B.
Comp Switches COMP on/off.
OD/DS Switches OD/DS on/off.
Preamp Switches PREAMP on/off.
EQ Switches EQ on/off.
FX-1 Switches FX-1 on/off.
FX-2 Switches FX-2 on/off.
Delay Switches DELAY on/off.
Chorus Switches CHORUS on/off.
Reverb Switches REVERB on/off.
Pedal FX Switches PEDAL FX on/off.
Send/Return Switches SEND/RETURN on/off.
Amp Ctl Switches Amp Control on/off.
Tuner Switches the tuner on/off.
Manual Switches Manual mode on/off.
PL Switches PHRASE LOOP on/off.
PL Rec/Play Record/play toggle for PHRASE LOOP.
PL Clear Clears the current phrase in PHRASE LOOP.
PL Mute/Play Mute/play toggle for PHRASE LOOP.
BPM Tap For tap input of MASTER BPM.
Delay Tap For tap input of the delay effect’s Dly Time
parameter.
MIDI Start Controls MIDI Start/Stop on an externally
connected MIDI device such as a drum machine
or sequencer.
MMC Play Toggles Play/Stop on an externally connected
MIDI device that responds to MMC messages.
Lev +10 Increases the Patch Level parameter by a value
of 10.
To Next Page
Loading...
Need help?
General
