Boss Phase Shifter PH-3 - Page 14

14
Setting the Tempo with the PH-3’s Pedal Switch
Setting the RATE near the de-
sired tempo beforehand allows
you to make faster and more nat-
ural tempo settings.
4. Press and continue holding the PH-3's
pedal switch for two seconds or
longer to finish setting the tempo.
The effect goes on, and instead of flash-
ing in red and green, the CHECK indica-
tor will light steadily in red.
* When you have finished setting the
tempo, the RATE changes to the value for
the tempo setting made with the pedal, so
the value will differ from the value
indicated by the RATE knob.
* When changed with the RATE knob, the
tempo is then the same as the value for the
RATE knob.