Boss RC-300 Loop Station User Manual

Saving a Phrase Memory
15
Overview Basic Operation Track
Phrase Memory
Rhythm LOOP FX System Settings USB MIDI AppendixSaving
Exchanging Phrase Memories
You can exchange phrase memories with one another, rearranging
the phrase memories.
1. Select an exchange-source phrase memory.
2. Press the [WRITE] button.
3. Press the [ ]/[ ] buttons until “Exchange” appears in
the display.
Exchange 13
My Memory
Exchange-Destination Phrase Memory Number
Exchange-Destination Phrase Memory Name
13
Exchange-Destination Phrase Memory Number
My Memory
Exchange-Destination Phrase Memory Name
4. Turn the [MEMORY/VALUE] knob to select the exchange-
destination phrase memory.
5. Press the [WRITE] button; the phrase memories will be
exchanged.
If you decide to cancel the operation, press the [EXIT] button.
Deleting a Phrase Memory
( Initialize)
This operation erases a phrase memory and initializes its settings.
* This device contains demo data (Phrase Memory 90–99).
Once you delete these, they cannot be recovered. Please
back them up as described in “Backing up to your computer”
(p. 37).
1. Select the phrase memory that you want to delete.
2. Press the [WRITE] button.
3. Press the [ ]/[ ] buttons until “Initialize” appears in the
display.
Initialize 13
My Memory
Phrase Memory Number to be Deleted
Phrase Memory Name to be Deleted
13
Phrase Memory Number to be Deleted
My Memory
Phrase Memory Name to be Deleted
4. Press the [WRITE] button; the phrase memory will be
deleted.
If you decide to cancel the operation, press the [EXIT] button.

Boss RC-300 Loop Station Specifications

General

Loop Tracks	3
Sampling Rate	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Bit Depth	24-bit
Phrase Loop	Yes
Outputs	2 x 1/4" (L, R)
MIDI	In, Out
Power Supply	AC adapter