To Next PageTo Next Page
Need help?Do you have a question about the Bostitch BCN662 and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, NOTICE symbols and words used in the manual.
Guidelines for safe work areas and electrical precautions during operation.
User safety guidelines, including staying alert and wearing protective equipment.
Proper usage, maintenance, and care of the power tool.
Covers eye/ear protection, fastener use, tool handling, and operational precautions.
Explains sequential and bump actuation modes and their use.
Risks associated with dust and required respiratory protection.
Risks of hearing loss and the necessity of wearing ear protection.
Safe practices for tool storage and avoiding moving parts in air vents.
Explanation of various symbols used on the tool label and their meanings.
Initial charging instructions and notes for battery packs.
Precautions for using, storing, and handling battery packs safely.
Guidelines for safely transporting battery packs to prevent hazards.
Explanation of the battery fuel gauge indicator and its function.
Information regarding the Rechargeable Battery Recycling Corporation seal.
Instructions for battery recycling and proper disposal methods.
Warnings and guidelines for safe operation of battery chargers.
Guidelines for selecting and using extension cords with chargers.
Advice on charger placement to ensure proper ventilation and prevent overheating.
Warnings about damaged chargers and the need for authorized service.
Step-by-step guide for charging the battery pack correctly.
Explanation of the charge status indicators on the charger.
How the charger handles temperature-sensitive batteries for optimal life.
Recommended ambient temperatures for charging battery packs.
Normal temperature conditions during charging and cooling advice.
Steps to take if the battery pack does not charge properly.
Further steps for persistent charging problems and diagnostics.
Details on nail size, shank diameter, and angle for the nailer.
Physical dimensions of the nailer, including length and width.
Safety warnings to follow before making any adjustments or installing accessories.
Instructions for attaching, removing, and repositioning the belt hook.
Step-by-step guide to insert and remove the battery pack from the tool.
How to use the trigger lock-off feature for safety.
Recommended hand placement for safe and secure tool operation.
Step-by-step guide for loading nails into the tool's magazine.
Procedure for safely removing nails from the magazine.
Details on sequential and bump actuation modes.
When and how to use the sequential actuation mode.
When and how to use the bump actuation mode.
How to adjust fastener depth using the depth adjustment wheel.
Safety steps to follow before adjusting the fastener depth.
How headlights operate and their limitations.
Meaning of headlight flashes for battery status and jammed nails.
Procedure to remove a jammed nail from the tool's nosepiece.
Advice for operating the tool in temperatures below freezing.
Advice for operating the tool in hot conditions to prevent damage.
Instructions for cleaning the tool's air vents and non-metallic parts.
Caution against using non-BOSTITCH accessories with the tool.
Guidelines for tool repairs and where to obtain authorized service.
Advantages of registering your product online for warranty and safety.
Details of the product's limited warranty coverage for defects.
Information about the included one year of free maintenance service.
Details of the satisfaction guarantee offered on the product.
Troubleshooting common problems when the motor does not run.
Diagnosing why the motor stops running shortly after activation.
Troubleshooting when the motor runs but no fastener is driven.
Identifying causes of excessive noise during tool operation.
Solutions for the drive blade getting stuck in the down position.
Diagnosing and fixing incomplete fastener driving.
Troubleshooting when the tool operates but doesn't drive nails.
Steps to resolve issues related to jammed nails in the tool.
General
