APPENDIX
7-4
Amber power indication, but sound is not
heard from either channel
No signal from source Check source controls, cables
and connections
Input level is attenuated in program mode Go to program mode, select input,
go to level and correct
No signal out to power amplifier Check connections to power amp
No power supply to audio channels Check power supply cables
Preamp is defective Return to dealer for servicing
Displays ” XX ONLINE ,”
then ” XX OFFLINE” continuously
More than one slave unit has the same
Boulderlink ID
Make certain all slave units have a
unique Boulderlink ID. See page
5-2
To Next Page
Loading...
