Bowflex Max Total 16/40 - Machine Slips During Use

16
Tighten the belt
tension a little more.
YES
Machine Slips During Use
BEGIN HERE
Replace the Upper
Belt Tensioner and
Upper Belt
Does the issue
persist?
Issue resolved.
NO
NO
Does it slip less?
Does the issue
persist?
Refer to the “Replace The Drive
Belt” procedure.
Follow the directions until it tells
you to loosen the Drive Belt
Tensioner Screw.
Loosen the screw, and adjust
the Drive Belt Tensioner, so that
it puts more tension on the drive
belt. Re-tighten the Drive Belt
Tensioner Screw.
YES
NO
YES