22
Does the noise
persist?
Does the noise
persist?
Noise Issues - Squeaking, Squealing or Chirping
BEGIN HERE
YES
Remove the rubber end cap,
where the pedal arm connects
to the crank arm, on both sides
of the machine.
Issue resolved.
Apply a drop of silicone to the bushings on each
side of the roller wheel (No need to disassem-
ble) one side at a time.
Do NOT apply lubricant directly to the wheel.
Catch any excess lubricant with a towel or
cloth.
Test for noise on each side.
NO
Apply a small drop of silicone based lubricant
on the rails, and then wipe the rails with a dry
towel. If too much lubricant is applied then
the roller wheel may not roll. Pedal the
machine slowly to ensure that the roller
wheels are turning freely.
Re-attach the end caps
loosely. If they are
pushed on too tight, they
will make squeaking
noises.
Does the noise
persist?
NO
YES
NO
YES
Go to Troubleshoot-
ing: Roller and Pedal
Go to Troubleshoot-
ing: Noises - Rubbing
/ Belt
Issue resolved.
Does the noise
sound like it’s coming
from the wheels/pedal
arms?
YES
NO
To Next Page
Loading...
