88
26. Grasp the Fan Pulley where the Fan Belt is engaged on it, and forcibly
rotate the Fan Pulley until the Fan Belt is fully engaged.
Keep ngers out of any pinch opportunities when rotating
the Fan Pulley.
27. Cut the Zip-Tie without damaging the new Fan Belt or Fan Pulley.
28. Installation is the reverse procedure.
29. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
To Next Page
Loading...
