Bowflex MAX TRAINER MAX TOTAL Series - Machine Adjustments

Assembly / Owner’s Manual
21
Moving the Machine
The machine may be moved by one or more persons depending on
their physical abilities and capacities. Make sure that you and others
are all physically  t and able to move the machine safely.
1. Grasp the Main Bar of the Static Handlebar Assembly to carefully tilt the
machine toward you onto the transport rollers. Be sure not to grab the
Console Display.
Be aware of the Handlebars and the weight of the machine before
tilting the machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions can affect the computer operation.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is
slightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. Loosen the locking nuts and adjust the levelers until they are evenly balanced in
contactwiththeoor.
Do not adjust the levelers to such a height that they detach or unscrew from
the machine. Injury to you or damage to the machine can occur.
3. Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.
Adjustments