Bowflex MAX TRAINER MAX TOTAL Series - Initial Set-Up; Getting Started

Assembly / Owner’s Manual
37
Todismountyourtnessmachine:
1. Move the Pedal you want to dismount from to the highest position, and bring the machine to a complete stop.
This machine is not equipped with a free-wheel. Pedal speed should be reduced in a controlled manner.
2. Grasp the Static Handlebars under the Console to steady yourself.
3. Withyourweightonthelowestfoot,swingtheupperfootoffthemachineanddownontotheoor.
4. Step off of the machine and release your grip from the Static Handlebars.
Initial Set-Up
1. Plug in the machine to a functioning wall outlet. The machine will start up, and the red Status LED will activate.
 IftheStatusLEDturnsoffbrieyevery2seconds,thentheConsoleneedstochargebeforethemachinecanstart.TheConsolewillchargefor
about60minutes.
Note: The Console may go to sleep if it does not receive any input after charging. Touch the screen of the Console to wake up the machine.
2. Whencharged,themachinewillactivateanddisplaytheCongratulations-ConnectWiscreen.TaponConnect.
Note:AWiconnectionisrequiredtouseyourBowex™MaxTotal™machine.IfyoudonothaveaWiconnectionavailable,contactyour
Bowex™MaxTrainer™Representativeimmediatelyforfurtherassistance.
3. TheConsolewilldisplaythelistofavailableWiconnections.TaponthedesiredWiconnection,andenterthepassword.TaponConnect.
4. TheConsolewilltestandconnecttotheWiconnection.
If the Console displays an Update Available screen, tap on the Agree button. The Console will update the software.
5. WithaWiconnectionestablished,taponBack.
6. TheConsolewillopentheBowex™MaxIntelligence™App.TaponGetStarted.
7. TheConsolewilldisplaytheoptionsscreen.ClickontheLogInoption.Followthepromptstoregisteryournewtnessmachine.Whenregistra-
tioniscompleted,yourtnessmachineisnowreadyforuse.
Note:TheBowex™MaxTotal™machinemustberegisteredusingaWiconnection.Oncetheinitialregistrationandcongurationiscom-
pleted,themachinecanbeoperatedwithoutaWiconnection.However,onlythebasicworkoutsandfunctionswillbeavailableforuse.
All coaching*, custom workouts*, and workout videos*areonlyavailablethroughaWiconnection.
8. TheConsolewilldisplaytheHometab.TheHometabwillencourageyoutodoaMax14Minuteworkoutortogetacustomworkout*.
Getting Started
1. Placethetnessmachineinyourworkoutarea.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your ability to
move freely. A rubber mat can be used below the machine to prevent the release of static electricity and protect your ooring.
The machine can be moved by one or more persons. Make sure that your own physical strength is capable of safely moving the
machine.
2. ExamineforanyobjectsbelowthePedalsandintheAirResistanceFan.Besureitisclear.
3. Connect the power cord to the machine and into a grounded AC Wall Outlet.
Note: If the Console does not turn on after connecting the power, the Console may need to be charged to be able to activate. Charge the Con-
sole until it is able to activate.
4. If you use a Heart Rate Monitor, follow the Heart Rate Monitor directions.
5. To mount the machine, move the Pedals until the one nearest you is in the lowest position.
*Thecustomworkout,Bowex™radio,andvoicecoachingfeaturesandcertainvideosrequireasubscriptiontothepremiumfeaturesoftheMax
Intelligence™app.TheMaxIntelligence™subscriptionmustbepurchasedseparatelybydownloadingtheMaxIntelligence™appontoyourphone
ortabletandsubscribingwithinthedownloadedappor(forUnitedStatescustomersonly)directlyfromNautilus,Inc.bycalling800-269-4216.This
feature may not be available in all countries.