22
Step 18 Remove Zip Ties
Tools:
• Scissors or utility knife
18-1 Cut and remove the zip-tie on each
Swing Arm cable.
NOTICE: Refer to the Bowflex
Revolution
®
Owner’s Manual
for instructions about
adjusting the cable tension.
Zip-tie
Step 19 Final Inspection
Please inspect your machine to ensure that all fasteners
are tight and components are properly assembled. Review all
warnings affixed to machine.
Congratulations! You have successfully completed assembly
of your Bowflex Revolution
®
home gym!
Be sure to record the machine serial number in the
Owner’s Manual.
Failure to visually check and test assembly
before use can cause damage to the Bowflex
Revolution
®
home gym and serious injury to
users and bystanders, and can also compromise
the effectiveness of your exercise program.
Assembling Your Bowflex Revolution
®
Home Gym
To Next Page
Loading...
