Bowflex Revolution - Preparing for Use, Storing, and Moving; Moving and Storing the Machine

7
Unboxing Your Bowflex Revolution
®
Home Gym
Figure E
Foot Caps
Figure D
Figure C
Step 2
2-1 Remove the Rear Stabilizer,
and Hardware Pack, (Figure C)
then remove the top layer of
styrofoam to expose the lower
portion of the Main Frame
(Figure D).
NOTE: The two Foot Caps that are packaged in this
box will be installed in Step 3-5 (Figure E).
Rear Stabilizer
Rear Stabilizer Hardware
Lower portion of
Main Frame
Top layer of
styrofoam