BOXER 322D - Daily Maintenance Procedures

Routine Service and Maintenance
4.2
Daily Maintenance Procedures
Do the following procedures daily or every 10 operating hours:
1. Check condition of all warning and instructional decals. Before operating the machine,
replace any missing or damaged decals.
NOTE: Make sure to read and understand all WARNING and SAFETY decals before
operating the machine.
• Allow engine to cool before lling fuel tanks.
• Do not overll because fuel could spill onto hot engine parts and ignite or
explode.
• Make sure engine is turned o.
2. Check engine fuel and ll as needed:
a. The Boxer has one saddle tank (Item 1, Figure 4–1), on the left side of the machine.
Figure 4-1 Fuel Level Check
b. The fuel tank has a fuel gauge located in the ller cap (Item 2, Figure 4-1). Remove cap
and visually inspect fuel level to make sure that the indicator is showing the proper fuel
level. Make sure that the tank has been lled on a daily basis.
Carefully pour diesel fuel into the tank, not exceeding the max ll indication shown by
the gauge in the fuel cap.
CAUTION
1
E
F
2