General Notes
• Read the instructions carefully before beginning the installation and carry out the actions as specied by
the manufacturer.
• The installation, programming, commissioning and maintenance of the product must only be carried out by
qualied technicians, properly trained in compliance with the regulations in force, including health and safety
measures and the disposal of packaging.
• The installer must ensure that the information for the user, where there is any, is provided and delivered.
• Before carrying out any cleaning or maintenance operation, disconnect the devices from the power supply.
• The equipment must only be used for the purpose for which it was expressly designed.
• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
• Warning: danger of explosion if the batteries are replaced with others of the wrong type.
• Once batteries are dead they must not be thrown away with unsorted waste but collected separately and
sent for suitable recycling.
DISPOSAL - Make sure the packaging material is not disposed of in the environment, but rather disposed of
in compliance with the laws in eect in the country in which the product is being used.
At the end of the product’s life cycle, make sure it is not disposed of in the environment. The equipment must
be disposed of in compliance with current laws and its components recycled where possible. The components
that should be recycled are marked with the material’s ID marker.
EC Declaration - BPT S.p.A. aSocio Unicodeclares that this device complies with directives 2004/108/EC and
2006/95/EC. Originals upon request.
To Next Page
Loading...
