Need help?Do you have a question about the Bpt TH/500 and is the answer not in the manual?
General| Brand | Bpt |
|---|---|
| Model | TH/500 |
| Category | Thermostat |
| Language | English |
Explains all icons, buttons, and display elements of the thermostat for user interaction.
Step-by-step guide for mounting the thermostat on a wall.
Details on power supply, relay contacts, loads, and remote inputs.
Instructions for battery replacement, including warnings.
Guide to setting the device's internal clock and calendar.
How to switch between heating, cooling, off, and frost-protection modes.
How to delay scheduled temperature changes by 15, 30, or 45 minutes.
Method to copy daily temperature schedules to other days.
Setting specific temperature points for heating and cooling.
Setting a fixed temperature manually, independent of schedule.
Manual mode active for a limited duration (hours/days).
Shows objective temperature or external probe temperature instead of time.
Procedure to unlock the screen using a code when screen lock is enabled.
How to enable screen lock and set a password code.
Adjusting the temperature reading by ±3°C.
Auto-adapting start-up time for desired temperature.
Setting the differential value for system management.
Selecting PI programs for system management.
Setting cycle duration, min ON time, and proportional band for P4.
Choosing between Celsius and Fahrenheit.
Assigning functions to terminals 1 and 2.
Choosing the primary temperature sensing probe.
Setting up the timed manual program via phone connection.
Automatically turns off thermal zones when a window opens.
Configures display back-lighting behavior and screen brightness.
Turns the audible feedback for button presses on or off.
Displays device operating hours and installed firmware version.
To Next Page
