BPP11 User Manual
1
CHAPTER 1 Introduction
Product Introduction
Thank you for purchasing the BRADY BBP11-34L series bar code printer. Although the
printer is small, it delivers reliable, superior performance.
This printer provides both thermal transfer and direct thermal printing at user-selectable
speeds of 2.0 or 3.0 ips. It accepts roll feed, die-cut, and fan-fold labels for both thermal
transfer and direct thermal printing. All common bar codes formats are available. Fonts and
bar codes can be printed in 4 directions, 8 different alphanumeric bitmap fonts and built-in
true type font capability. You will enjoy high throughput for printing labels with this printer.
Compliance
CE Class B:
EN55022: 1998+A1: 2000+A2: 2003
EN55024: 1998+A1: 2001+A2: 2003 IEC 61000-4 Series
EN61000-3-2: 2006 & EN61000-3-3: 1995+A1: 2001
FCC Part 15, Class B
UL, CUL
C-Tick:
CFR 47, Part 15/CISPR 22 3
rd
Edition: 1997, Class B
ANSI C63.4: 2003
Canadian ICES-003
TÜV-GS: EN60950: 2000
Note: Continuous printing will cause printer motor overheat. Printer will stop
printing automatically about 10~15 minutes until motor is cooled down. Do not turn
off power when printer pauses or the data transfered to printer buffer will be lost.
Note: The maximum printing ratio per dot line is 15% for this printer. To print the
full web black line, the maximum black line height is limited to 40 dots, which is
3.3 mm for 300 dpi resolution printer.
To Next Page
Loading...
