31
Dump Mode
The printer enters dump mode after printing the printer configuration. In the dump mode,
all
characters are printed in 2 columns as shown. The ASCII characters are received from
your
system and right side data shows the corresponding hexadecimal value of the
characters. It
allows users or engineers to verify and debug the program.
ASCII Data
Notes:
•
1. Dump mode requires 4” wide paper width.
•
2. Turn off / on the power to resume printer for normal printing.
•
3. Press FEED button to go back to the previous menu.
Hex decimal data related to
left
column of ASCII data
To Next Page
Loading...
