32
Printer Initialization
Printer initialization is used to clear DRAM and restore printer settings to defaults. The
only
exception is ribbon sensitivity, which will not be restored to default.
To activate Printer initialization:
1.
Turn off the power switch.
2.
Hold the Feed button down, then turn the power switch ON.
3.
Release the button when the LED turns green after 5 amber blinks. (Any time during
the 5 blinks).
The LED color changes as follows:
•
Amber
→
Red
(5 blinks) →
Amber
(5 blinks) →
Green
(5 blinks) →
Green/Amber
(5 blinks) →
Red/Amber
(5 blinks) →
Solid Green
To Next Page
Loading...
