34
Skip AUTO.BAS
TSPL2 programming language lets users download an auto execution file to flash memory.
The printer will run the AUTO.BAS program immediately when printer power is turned on.
The AUTO.BAS program can be interrupted without using the power-on utility to run the
program.
To skip an AUTO.BAS program:
1.
Turn off printer power.
2.
Press the FEED button and then turn on power.
3.
Release the FEED button when LED turns solid green.
The LED color changes as follows:
•
Amber
→
Red
(5 blinks) →
Amber
(5 blinks) →
Green
(5 blinks) →
Green/Amber
(5 blinks) →
Red/Amber
(5 blinks) →
Solid Green
4.
Printer will be interrupted to run the AUTO.BAS program.
To Next Page
Loading...
