49
Configuration
Setup Mode
5/13/08 BBP81 User Manual Y882746
3. Press SETUP/EXIT to select the displayed choice.
When the configuration and calibration sequence is done, BBP81 displays.
LOAD DEFAULTS
Restores all parameters other than the network settings back to
the factory defaults. Use care when loading defaults because
you will need to reload all settings that you changed manually.
Note • Loading factory defaults causes the printer to
auto-calibrate.
LOAD LAST SAVE
Loads values from the last permanent save.
DEFAULT NET
Restores the wired and wireless network settings back to
factory defaults.
LCD Description
To Next Page
Loading...
